Diamond IPC || Set IP Camera to Static || Web GUI

Diamond IPC || Set IP Camera to Static || Web GUI

Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply.

  1. Download and install ConfigTool
  2. The Config Tool should display your IP Camera. Click the, image-1644875945795.png icon to open Internet Explorer and access your IP Camera.
    image-1644876804339.png
  3. Login with your username and password.

    image-1644877088963.png

  4. Click on Setting > Network

    image-1645113120472.png

  5. Click on TCP/IP. Change Mode from DHCP to Static.

    image-1645113188912.png

  6. Input the IP Address, Subnet Mask, Default Gateway, Preferred DNS and Alternate DNS. Click "Save" when done.

    image-1645113351626.png

    • Related Articles

    • Emerald IPC || How to Set IP Camera to Static

      1. After logging in go under setup, go to network settings on the left hand side, then click on network once more 2. The option where it says obtain IP address you're going to want to click on that option and a drop-down menu appears, from there you ...

    • UNV IPC || How to Set IP Camera to Static

      Download and install EzTools 2.0 You can do so using this link: https://drive.google.com/drive/folders/10aLpN_9r6WxAGqb_CAtSSmPRU6tbZxu1 Once installed click and open the app Once it’s opened, it will scan for devices on the network. You can click ...

    • Diamond IPC || Set Up RTMP on a Diamond IP Camera (WEB 5.0)

      How to Set Up RTMP on an IP Camera (WEB 5.0) Real-Time Messaging Protocol (RTMP) in IP cameras is used for efficient live streaming of audio, video, and data over the internet. It provides low latency streaming for real-time viewing, ensures stable ...

    • Diamond IPC || Configuring Date and Time on an IP Camera || Web GUI

      Note: If your camera is connected to the back of an NVR, you do not need to set the date and time on each camera. The NVR will do that automatically. If you don't have Config Tool yet, you can follow this link: Config Tool When you open Config Tool, ...

    • Diamond IPC || Enabling ONVIF || Web GUI

      This is a quick guide on how to find an enable ONVIF on a Diamond IPC. Step 1. Log into the IPC directly with the camera's IP address. NOTE: Default IP is 192.168.1.108. Step 2. Click on settings then find "Safety" from the "System" drop down on the ...