Diamond Recorder || Synchronize IP camera time settings with NVR || Web GUI
Synchronize IP camera time settings with NVR
Setting the Time and Adjusting the Time Sync
Right-click with your mouse and go to Main Menu > System > General and then choose the Date & Time tab at he top.
Make sure that the date and time, DST (if applicable in your state/territory), and NTP are set up correctly. Enter the correct Time Zone (Google for your region’s UTC). Additionally, enter the NTP Server (we recommend to use the default time.windows.com or pool.ntp.org).The DST (Daylight Saving Time) for North America and Europe is shown below. So, when the time comes, the machine will modify the time (one hour ahead/back) automatically. Click the Save button after setting the time, then select Apply.
On the next step, go to the Basic tab. Make sure that the CAM Time Sync is enabled, and the interval is set to 1. This means the recorder’s time will synchronize with the camera’s every 1 hour. Select Apply.
Related Articles
Diamond Recorder || Sync IP Camera Time with Recorder || Local GUI
Fix Security Camera Time Sync Issues Setting the Time and Adjusting the Time Sync Right-click with your mouse and go to Main Menu > System > General and then choose the Date & Time tab at he top. Make sure that the date and time, DST (if applicable ...Diamond IPC || Configuring Date and Time on an IP Camera || Web GUI
Note: If your camera is connected to the back of an NVR, you do not need to set the date and time on each camera. The NVR will do that automatically. If you don't have Config Tool yet, you can follow this link: Config Tool When you open Config Tool, ...Diamond Recorder || Tripwire Setup (Web GUI)
Diamond Series Tripwire Setup (Web GUI) 1. From the Main Menu select AI 2. Select Parameters on the left. Then select Smart Plan. Select the camera channel at the top. Select and highlight IVS (You may need to deselect any other options). Select OK ...Emerald Recorder || Recorder Add IP Camera || WEB GUI
Recorder Add IP Camera To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look ...Diamond Recorder || Configuring Audio and Two Way Talk w/ IP Cameras || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...