ENS Recorder || Enable notifications for Remote View
Enable any basic or smart event, once you have set an area of detection click on linkage method > enable notify surveillance center.
This can be done on both local gui and web portal.
Enable notify surveillance center after enabling desired event
Be sure to enable notifications on your phone as well
Related Articles
Titanium Recorder || Configuring Push Notifications || Local GUI
How to setup MD Notifications Video ***Note: You will need to download the SuperLive Plus APP from the phone’s respective APP store.*** Please make sure the recorder is well connected to the Internet. NAT is “Enable”, the NAT Status shows “Success” ...ENS Recorder || Enabling Mobile Push Notifications || Web Client
***Note: You will need to download the ENS Vision app from the phone’s respective app store.*** Please make sure the recorder is well connected to the Internet. And the Register Status of the “Platform Access” shows Online and the ENS Vision Account ...ENS Recorder || Enabling Mobile Push Notifications || Local GUI
***Note: You will need to download the ENS Vision app from the phone’s respective app store.*** Please make sure the recorder is well connected to the Internet. And the status of the “Platform Access” shows Online and the ENS Vision Account linked to ...ENS Recorder || Adding a Recorder to ENS Vision || Local GUI
***Note: You will need to download the ENS Vision app from the phone’s respective app store.*** During the initial setup of the recorder, you will have an option to set up the network to gain internet access and enable the P2P (Platform Access) ...ENS Recorder || Configuring Email Notifications || Web Client
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...