ENS Recorder || Enhanced IP Mode features and limitations ||

How to Enable Enhanced IP Mode

*Important Considerations

Enabling Enhanced IP Mode will allow you to connect to the maximum number of cameras, but it also comes with some limitations:

• Enhanced IP Mode will disable 2K/4K output resolution.
• The following features will be unavailable on analog channels:
  • Perimeter protection
  • Human or vehicle detection of motion detection
  • Facial detection
  • Face picture comparison functions

Steps to Enable Enhanced IP Mode

Access the Recorder Interface

Log in using your admin credentials.

Navigate to System Settings

Once logged in, go to the main menu.

Select System Configuration > General > More Settings.

Enable Enhanced IP Mode

Look for the option labeled Enhanced IP Mode.

Check the box or toggle the switch to enable Enhanced IP Mode.

Save and Apply Settings

Click Apply to confirm the changes.

The recorder might need to restart for the new settings to take effect.

Why Enable Enhanced IP Mode?

Compatibility: Enhanced IP Mode improves compatibility with various IP cameras, making it easier to integrate different brands and models into your surveillance system.

Channel Capacity: This mode allows you to connect more IP cameras to the recorder, maximizing the use of available channels.

Performance Optimization: Enhanced IP Mode optimizes the performance of connected IP cameras, ensuring better video quality and more reliable streams.

Future-Proofing: Enabling this mode prepares your system for future expansions and updates, ensuring long-term compatibility and performance.

By enabling Enhanced IP Mode on your Hikvision recorder, you can take advantage of improved compatibility, increased channel capacity, and enhanced performance for your IP cameras. This setting is especially useful for larger or more complex surveillance systems.

Additional Support

For further assistance, please contact our technical support team at support@enssecurity.com or call (888) 397-1999.

• Related Articles

• ENS Recorder || Disable 5MP Lite Mode - Increase local playback channels

  Storage -> advanced -> disable 5MP lite mode

• ENS IPC || IP Camera Initialization || Web Client

  ***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...

• ENS Recorder || Adding a Recorder to ENS Vision || Local GUI

  ***Note: You will need to download the ENS Vision app from the phone’s respective app store.*** During the initial setup of the recorder, you will have an option to set up the network to gain internet access and enable the P2P (Platform Access) ...

• ENS Recorder || Finding Recorder Information || Web Client

  To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

• ENS Recorder || Prepping Recorder for ENS Vision || Web GUI

  To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...