Titanium Recorder || Enable One-Touch Disarm on Local Interface || Local GUI
For FW versions 1.4.9 & 1.4.10
Configure disarm functions in the local interface:
- Go to AI/Event
- System Disarm
- Enable Remote Client
- Add cameras you want to disarm
- Configure the disarming functions
- Click OK
- Apply the settings
You can then use the disarm function on SLP to disable the functions selected in the local interface:
Related Articles
Titanium Recorder || Enable virtual host || Web GUI
The virtual host function allows you to access a Titanium IP camera that is connected to the built in PoE. This helps eliminate the need to wire directly to the built in PoE to gain access to a camera and change settings. The virtual host function is ...Titanium recorder || Backup Footage to USB || Local GUI
Backup Footage to USB (Local GUI) on Titanium Recorders From the full screen menu Highlight and Select the Menu option then select Playback On the Playback screen you will determine date, time and number of cameras to back up, if one camera double ...ENS Recorder || How to enable Virtual Host on ENS H recorders (Web GUI)
How to enable Virtual Host on ENS H recorders (Web GUI) Note: Virtual host allows you to connect to cameras using the local IP address of the recorder. Virtual host cannot be accessed remotely across different networks. Log into your recorder and ...Titanium Recorder || How To Enable Spot Out || Local GUI
Log into the system. Press the icon on the bottom left hand corner, then select “Settings”. On the Settings menu, click on “System” On the system page, please put a check mark next to “Spot”. After doing this, click on “Output Settings”. On this ...Titanium Recorder || Email notifications without less secure apps (Gmail) || Web GUI
Titanium: Email notifications without less secure apps (Gmail) - Web Gui Less secure apps is being discontinued by Google so this guide will go over what to do instead. First we will have to set up app passwords which require 2-Step Verification. ...