Titanium Recorder || How To Enable Spot Out || Local GUI
Log into the system. Press the icon on the bottom left hand corner, then select “Settings”.
On the system page, please put a check mark next to “Spot”. After doing this, click on “Output Settings”.
On this page, click on output 2 (spot output). You will notice a + sign under dwell. Click this plus sign as needed to create new channels to dwell. Each square will be a single channel. You will need to click on each square small square (above the + sign) and drag a camera into the larger square in the right hand side.
***Note*** The Titanium system can only display a single channel at a time when using it for spot out. The BNC port may also be used to mirror the main output if the “Spot” option in the system menu is left unchecked.
Related Articles
Titanium Recorder || Enable virtual host || Web GUI
The virtual host function allows you to access a Titanium IP camera that is connected to the built in PoE. This helps eliminate the need to wire directly to the built in PoE to gain access to a camera and change settings. The virtual host function is ...Titanium Recorder || Enable One-Touch Disarm on Local Interface || Local GUI
For FW versions 1.4.9 & 1.4.10 Configure disarm functions in the local interface: Go to AI/Event System Disarm Enable Remote Client Add cameras you want to disarm Configure the disarming functions Click OK Apply the settings You can then use the ...Titanium || Enable and Disable Plug and Play
Enable and Disable Plug and Play - Titanium Access the Web UI of your recorder via the Local IP or Autonat and select "System" Select PoE Settings From here you will be able to disable and enable the Plug and Play function for the internal POE ports ...Diamond Recorder || How to enable 2 way talk || Local GUI
To use 2-way talk on a Diamond series recorder, you must enable audio on each camera you plan to use. Step 1. Log into the NVR. Step 2. Right click with your mouse and click on "Main Menu". Step 3. Click on "Camera" located at the left side of the ...Titanium recorder || Backup Footage to USB || Local GUI
Backup Footage to USB (Local GUI) on Titanium Recorders From the full screen menu Highlight and Select the Menu option then select Playback On the Playback screen you will determine date, time and number of cameras to back up, if one camera double ...