Titanium Recorder || Titanium Firmware Update (1.3.3 FW and Up)
1. Log into the unit via IP/DDNS
OR
Use autonat.com, using the QR code on the recorder to log in. The QR code will be something like this:
NXXXXXXXXXXX
2. locate the settings button, find the Information button and click Basic
you can find the device model here in the Basic tab under Information
this will be used to figure out the firmware version required to update device
3. locate Maintenance, and click Upgrade
Upload your firmware version and you will be prompted to enter the admin password
Once it begins updating, it will take about 5-10 minutes and the recorder will reboot
Related Articles
Titanium Recorder || Resolving "Device Busy" Error During Playback ||
If you are encountering a "Device Busy" error when attempting to view playback on your recorder or through the SuperLive Plus app, it is likely that the recorder is operating on firmware version 1.4.6. This issue can be temporarily resolved by ...Titanium IPC || Titanium IPC Firmware Update
Titanium Upgrade Firmware IP camera: We have three ways to update FW on IP cameras: Directly through the camera’s GUI, through the upgrade tool, or by the NVR that is running the 1.4.6+ FW version. Note: If you have a kernel update, perform the ...Emerald Recorder || Recorder FW Update || Web GUI
Finding Recorder Information (Web GUI) To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The ...Titanium Recorder || Firmware updates for NVR/DVR with current firmware 1.2.9 or below
Typically you do not need to step-upgrade Titanium recorders unless noted. (e.g. 1.2.x-1.3.x requires a special firmware) However, 1.0.1, 1.0.2, and 1.0.3 will not accept the higher firmware's. To work around this please upgrade to 1.0.4, then update ...Diamond Recorder || How to Firmware Update the Recorder || Web Client
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...