UNV Recorder || Configuring Line Crossing || Local GUI
Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password.
After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may receive the login screen after selecting the menu option, but will be taken to the main menu page once logged in. On the main menu, select Alarm.
After selecting Alarm, select VCA.
After selecting VCA, select Cross Line Detection.
On the Cross Line Detection page, you will be able to draw the line intrusions as wanted. Make sure to enable Cross Line Detection by marking the checkbox next to Enable.
Related Articles
ENS Recorder || Configuring Line Crossing || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. In the Main Menu, select the storage tab. After selecting the Storage menu, select the Event tab. When selecting ...UNV Recorder || Configuring Line Crossing || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...ENS Recorder || Configuring Line Crossing || Web GUI
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...Emerald Recorder || Line Crossing Configuration || Local GUI
1. In the NVR menu, select VCA 2.In the VCA menu, ensure you are on the VCA config tab located on the left and then select the camera that is needed for line crossing setup. Under smart intrusion prevention enable Cross line Detection and select the ...Titanium Recorder || Setting Up Line Crossing || Local GUI
Log into the system by clicking on the icon on the bottom left hand corner and selecting “Login After logging in, select “Settings” and select “Camera” in the main menu In the Camera menu, select Intelligent Analytics. Intelligent Analytics will ...