UNV Recorder || How To Unbind From Cloud Account

UNV Recorder || How To Unbind From Cloud Account

Uniview (UNV) How to unbind from cloud account

 

From the Live View of the HDMI interface of the Uniview NVR, click on the Home Icon in the bottom left-hand corner to access the menu of the NVR.

 

Once the Main Menu is opened up, go to Network > Basic > EZCloud.

From the EZCloud menu, click on the Delete icon to unbind from its current cloud account.


*You can also unbind your Uniview recorder through the web interface.

From the Live View of the web interface of the Uniview NVR, go to Setup > Network > EZCloud > Delete.

    • Related Articles

    • UNV Recorder || EZ Cloud sharing

      UNV Recorder || EZ Cloud Sharing Devices shared through EZ Cloud must be shared by role or function. Log into EZ Cloud and share to another account Enter in the account of who you’d like to share to, you can also adjust the duration and type of ...

    • ENS Recorder || Unbind Platform Access

      ENS Recorder || Unbind Platform Access Unbinding through ENS Vision / Guarding Vision may not work unless you are on the same network when it was first set up. You can also try to get the original account it is bound to and unbind from there. *unbind ...

    • Diamond Mobile APP || Unbind device from DMSS Account (Legacy)

      1. In the event that customer adding a Diamond device that already bound to an account, user will get this following error. 2. Click on Appeal. 3. Customer will be asked to upload a picture of their device with serial number label, and Proof of ...

    • Diamond Mobile APP || Unbind device from DMSS Account

      How to unbind a Diamond series device with DMSS. There are two parts to this guide. Part 1. Take a picture of the sticker that is physically on the device. Part 2. Open the DMSS app and make sure you are signed into the account you wish to take over ...

    • UNV Recorder || How to Update Firmware on Recorder || Web GUI

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...