Diamond IPC || Set up PTZ auto tracking while on tour mode
Log into the PTZ camera through the web GUI.
Select Setting.
Select PTZ and then select Function.
Use the PTZ controls to position the camera at the starting point.
Depending on how large of a distance that needs to be covered, several presets will need to be created. Here we are going to create 6. In the Preset tab, click Add and move the camera to its first position. click Save. This will step will need to be repeated until the camera is back at its start position.
Once all presets are created, click the Tour tab. Select Add to create a Tour. Edit the tour name by double clicking on it.
In the 2nd box, the presets will need to be added in the order needed. Click Add the first preset. Click Add again and this time double click on the preset number so that it turns into a drop down to select preset 2. Repeat the steps until presets are back at starting point and click Save.
Select Scan and adjust motion speed here.
Select Idle Motion. Enable the function. Select Tour next to Idle Motion. Select a tour next to Number and Save.
Select PowerUp. Enable the function, select Tour, and Save.
Click on Event and then select Smart Plan.
For Global select Video Matadata. It will turn orange when it is selected. Click Save.
Now all the preset and can be added. Click Add Plan and select the first preset. This has to be done for all presets.
Select Deep IVS. It's the image of a light bulb. Once selected its will turn orange. Click on save.
Select Deep IVS.
For this next step, you will have to set it for all presets. Select Presets and start with the first preset. Click on the green plus sign. It will add the first trigger for this preset. Repeat this step until all presets are done.
Additional setting shown below.
Click on Draw Rule. The area that needs to be triggered will now be drawn. Start creating trigger lines by left clicking and creating the shape. The line will be green. Once done, right click to release. Click Save.
Select Idle Motion. Enable the function. Select Tour next to Idle Motion. Select a tour next to Number and Save.
Select PowerUp. Enable the function, select Tour, and Save.
Click on Event and then select Smart Plan.
For Global select Video Matadata. It will turn orange when it is selected. Click Save.
Now all the preset and can be added. Click Add Plan and select the first preset. This has to be done for all presets.
Select Deep IVS. It's the image of a light bulb. Once selected its will turn orange. Click on save.
Select Deep IVS.
For this next step, you will have to set it for all presets. Select Presets and start with the first preset. Click on the green plus sign. It will add the first trigger for this preset. Repeat this step until all presets are done.
Additional setting shown below.
Click on Draw Rule. The area that needs to be triggered will now be drawn. Start creating trigger lines by left clicking and creating the shape. The line will be green. Once done, right click to release. Click Save.
Related Articles
Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI
Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI Begin by accessing the Web GUI of the PTZ camera and select the setting icon in the upper right of the web page. Select PTZ and adjust where you would like to set the home position ...Titanium IPC || Enabling PTZ Auto Tracking
Enabling Titanium PTZ Auto Tracking Logging into the camera directly Select Config on web page On the left hand side choose an “Event” For this example we chose “Line Crossing” Enable the event Enable “Trigger Track” Save settings In the next section ...Diamond IPC || PTZ Auto Tracking Configuration (new GUI)
Diamond Auto Tracking PTZ (Updated GUI) From the main view of the PTZ, select the home button Then select PTZ Under preset, add a preset, and move the camera for the first preset using the PTZ controls. We will use this preset as the Home position. ...UNV IPC || PTZ Auto Tracking
Log into the PTZ. Click on Setup Navigate to Intelligent- -> Smart --> Auto Tracking., then click on the Gear icon Enable Alarm Sound and Alarm Lights if needed under "Trigger Actions"Diamond IPC || Setting Up Auto Tracking PTZ || Web GUI
NOTE: You can have multiple presets with auto tracking, but there is a delay of about 1 second when the camera swaps between them. This is affected by the complexity of the scene and how many auto tracking presets you have enabled. 1. Log into your ...