Diamond IPC || Setting Up Auto Tracking PTZ || Web GUI

Diamond IPC || Setting Up Auto Tracking PTZ || Web GUI

NOTE: You can have multiple presets with auto tracking, but there is a delay of about 1 second when the camera swaps between them. This is affected by the complexity of the scene and how many auto tracking presets you have enabled.

 

1. Log into your PTZ camera web client, install any plug ins that are requested. 

image-1621619835815.png

 

 

2. Go to the "Setup" menu.

image-1621619778564.png

 

 

3. Go to "PTZ Settings" then, click on "Function".

image-1621620181734.png

 

 

4. Click "Preset" and use the arrows to position the camera to the desired area. Click "Add". Repeat for as many presets as you like.

image-1621620134179.png

 

 

5. Make sure you press "Save".

image-1621620258356.png

 

 

6. Go to "Event", then click on "Smart Plan". Then on "Add Plan".

image-1621620450243.png

 

 

7. On the "Add Plan" drop down select the preset that you want to have IVS rules, you can add multiple. 

image-1621620506214.png

 

 

8. Select "Deep IVS" (Lightbulb) for all presets that you want to have Deep IVS rules.

image-1621620560797.png

 

 

9. Under "Event", select "Deep IVS".

image-1621620589878.png

 

 

10. Click the plus sign in the upper right corner of the table to add an IVS rule.

image-1621620617137.png

 

 

11. Select which rule type you would like from the drop down menu.

image-1621620647910.png

 

 

12. Click "Draw Rule", using left - click, draw regions around the image that you want to use as triggers. Once finished drawing, press right click.

image-1621620693950.png

image-1621620715382.png

 

 

13. Make sure that "Alarm Track" is enabled, this is what enables auto tracking. You can configure how long the camera tracks (in seconds) here as well.

image-1621620752916.png

 

 

14. Click "Save". 

image-1621620780609.png

 

    • Related Articles

    • Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI

      Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI Begin by accessing the Web GUI of the PTZ camera and select the setting icon in the upper right of the web page. Select PTZ and adjust where you would like to set the home position ...

    • Diamond IPC || Set up PTZ auto tracking while on tour mode

      Log into the PTZ camera through the web GUI. Select Setting. Select PTZ and then select Function. Use the PTZ controls to position the camera at the starting point. Depending on how large of a distance that needs to be covered, several presets will ...

    • Titanium IPC || Enabling PTZ Auto Tracking

      Enabling Titanium PTZ Auto Tracking Logging into the camera directly Select Config on web page On the left hand side choose an “Event” For this example we chose “Line Crossing” Enable the event Enable “Trigger Track” Save settings In the next section ...

    • Diamond IPC || PTZ Auto Tracking Configuration (new GUI)

      Diamond Auto Tracking PTZ (Updated GUI) From the main view of the PTZ, select the home button Then select PTZ Under preset, add a preset, and move the camera for the first preset using the PTZ controls. We will use this preset as the Home position. ...

    • UNV IPC || PTZ Auto Tracking

      Log into the PTZ. Click on Setup Navigate to Intelligent- -> Smart --> Auto Tracking., then click on the Gear icon Enable Alarm Sound and Alarm Lights if needed under "Trigger Actions"