Diamond Recorder || Remote Access via P2P || WEB GUI

Diamond Recorder || Remote Access via P2P || WEB GUI

1. SETTING > NETWORK > TCP/IP 

web.settings.PNG

web.net.tcp.PNG

 

2. You can either set the device on a static IP or turn DHCP on to automatically grab an IP from the network. Click " Apply " when done

web.enable.DHCP.PNG

3. Locate P2P tab on the lower left and enable P2P and click " Apply ".

web.p2p.PNG

4. You should see the the status change to "Online". You can now use this device for remote viewing on our software

web.online.status.PNG

  • If you run into any issues getting the P2P to show online, reboot the device and try again. If that still doesn't work you may have a firewall on the network that is blocking the connection to the P2P servers

    • Related Articles

    • Diamond Recorder || Resetting the Recorder Password || Web GUI

      Diamond Web: How to Password Reset Recorder ***Note: You must use Internet Explorer to view the system via web interface*** ***You will need the phone app for this password reset (IDMSS Plus or GDMSS Plus) To access the web client, please use a ...

    • Diamond Recorder || Changing Live View Layout (5.0) || Web GUI

      How to Set Up Live View Layout Through Web GUI 5.0 Video: https://youtu.be/ShNG77InIsg This guide provides step-by-step instructions on how to customize the live view layout of security systems using the Web GUI 5.0. Ensure that the recorder is ...

    • Diamond Recorder || How to Default the Recorder || Web GUI

      ***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...

    • Diamond Recorder || Setting Up Recording Schedules || Web GUI

      ***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...

    • Diamond Recorder || How to View Logs || Web GUI

      ***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...