Titanium General
Titanium General || How to Reset the NVMS Admin Password ||
How to Reset the NVMS Admin Password Applies to: Titanium NVMS (confirm versions) Question How do I recover or reset the NVMS admin password if it has been forgotten? Answer Use the Forgot password option on the NVMS login screen. There are two ...
Titanium General || How to Play Back Recordings from an NVR/DVR Hard Drive Directly on a PC ||
How to Play Back Recordings from an NVR/DVR Hard Drive Directly on a PC Applies to: Titanium NVR and DVR hard drives (confirm models) Symptom The NVR has malfunctioned and can’t play recordings, or a new hard drive has been installed and the NVR can ...
Titanium General || NVR/DVR Shows a “No Disk” Pop-Up at Startup That Can’t Be Turned Off ||
NVR/DVR Shows a “No Disk” Pop-Up at Startup That Can’t Be Turned Off Applies to: Titanium NVR firmware 1.4.5 and later, DVR firmware 1.3.8 and later (confirm models) Symptom When no hard drive is connected, a “No Disk” pop-up appears every time the ...
Titanium General || Third-Party Thermal Camera Added to NVR Doesn’t Show the Thermal Channel ||
Third-Party Thermal Camera Added to NVR Doesn’t Show the Thermal Channel Applies to: Titanium NVRs with dual-lens thermal cameras (confirm models) Question I added a third-party thermal camera to the NVR, but the thermal imaging channel isn’t ...
Titanium General || IPC AI Doesn’t Detect People Who Are Crawling, Kneeling, Lying Down, or Squatting ||
IPC AI Doesn’t Detect People Who Are Crawling, Kneeling, Lying Down, or Squatting Symptom When a person is crawling, kneeling, lying down, or squatting on the ground, the IPC’s AI alarm isn’t triggered. Cause The AI algorithm in Titanium products ...
Titanium IPC || PTZ “Still Time” Setting Doesn’t Delay the Return to the Monitoring Position After Manual Control ||
PTZ “Still Time” Setting Doesn’t Delay the Return to the Monitoring Position After Manual Control Symptom You set Still Time to 10 seconds, then operate the PTZ manually. The camera still returns to the monitoring position after 5 seconds, so it ...
Titanium General || Error 0x20000002 When Adding an IPC to a DVR ||
Error 0x20000002 When Adding an IPC to a DVR Applies to: TVT DVR and NVR, adding an IPC by IP address Symptom When you add an IPC to the DVR by IP address, this error appears: “Unknown error! Error code: 0x20000002”. Cause The IPC has not been ...
Titanium General || How to Pair a Doorbell with the ED-DB2-CHIME ||
How to Pair a Doorbell with the ED-DB2-CHIME Applies to: ED-DB2-CHIME Question How do I pair a doorbell with the ED-DB2-CHIME chime? Answer Put the chime into pairing mode with its Set button, then press and hold the doorbell’s Bell button so it ...
Titanium General || Face Detection Limited to 1 Channel After Upgrading NVR to v1.4.13 ||
NVR Supports Only One Face Detection Channel After Upgrading to v1.4.13 (“No Resource”) Applies to: TVT NVR firmware 1.4.13 and later, with face detection (AI by NVR) (confirm brand and models) Symptom After upgrading the NVR to v1.4.13, face ...
Titanium General || Do NVRs/DVRs Support Solid-State Drives (SSDs)? ||
Do NVRs/DVRs Support Solid-State Drives (SSDs)? Applies to: TVT NVR and DVR (confirm brand and models) Question Can an NVR or DVR use a solid-state drive (SSD) for recording storage? Answer SSDs are not recommended. Compatibility testing has only ...
Titanium General || How to Retrieve an IPC’s MJPEG Stream via HTTP ||
How to Retrieve an IPC’s MJPEG Stream via HTTP Applies to: TVT IPC (confirm brand and models). Most current models support MJPEG; older, discontinued models may not. Question How do I pull an IPC’s video stream over HTTP? Answer The IPC supports HTTP ...
Titanium Recorder || How Long and How Many Logs Can an NVR/DVR Store? ||
How Long and How Many Logs Can an NVR/DVR Store? Question How long can an NVR or DVR keep logs, and how many log entries can it store? Answer Log capacity depends on the firmware version: The 128 MB hard drive allocation was added to support log ...
Titanium General || Why NVR Web Backups Split Recordings into Multiple Smaller Files ||
Why Web Backups Split Recordings into Multiple Smaller Files Question When backing up recordings to a specified folder from the NVR web playback interface, the backup is split into multiple files. Why? Answer The NVR limits the size of each backup ...
Titanium General || Default Password ||
Titanium General || Default Password Author: ENS Technical Support Date: 09/16/2026 Product / Category: Titanium NVR/DVR Default Password Article Description Titanium devices use 123456 as the default password unless a custom password was created ...
Titanium General || NVR Firmware File Formats: .fls vs .pkg ||
NVR Firmware File Formats: .fls vs .pkg Applies to: TVT NVR firmware (confirm brand) Question Why are some NVR firmware files in .fls format and others in .pkg format? Answer The file extension shows which type of system the NVR uses: Extension NVR ...
Titanium General || Web Playback Error: “The decoding capacity of the plugin has reached the maximum limit (24MP)” ||
Web Playback Error: “The decoding capacity of the plugin has reached the maximum limit (24MP)” Applies to: TVT NVR web interface with the browser plugin installed (confirm brand Symptom After installing the NVR browser plugin and playing back ...
Titanium General || Supported Wi-Fi Adapters for 1.3.x DVRs ||
Supported Wi-Fi Adapters for 1.3.x DVRs Applies to: TVT Wi-Fi DVRs, firmware 1.3.8 and 1.3.10 (confirm brand) Question Which Wi-Fi adapter models are supported by 1.3.x DVRs? There is currently no test data for Wi-Fi adapter models, so they are not ...
Titanium General || Backed-Up NVR/DVR Recordings Not Found When Exporting from an IE Mode Browser ||
Backed-Up NVR/DVR Recordings Not Found When Exporting from an IE Mode Browser Applies to: NVR firmware 1.4.6 and earlier, DVR firmware 1.4.0 and earlier, using an IE mode browser (e.g., Microsoft Edge in IE compatibility mode) with plugin 1.0 Symptom ...
Titanium General || Upgrading DVR/NVR from V1.2.x to V1.3.x via USB Flash Drive ||
Upgrading DVR/NVR from V1.2.x to V1.3.x via USB Flash Drive Published: October 9, 2026 When to Use This DVRs and NVRs running V1.2.6 or earlier (V1.2.x, V1.1.0, etc.) cannot upgrade directly to V1.3.3 or later. This USB procedure brings them to ...
Titanium General || Why can't AVI format video backed up from the device be played on Windows Media Player? ||
Question: Why can't AVI format video backed up from the device be played on Windows Media Player? Answer: When AVI video backed up from the device is played using Windows Media Player (the built‑in player on Windows), the screen may appear black or ...
Titanium General || Which firmware versions of IPC and NVR first support Level 2 video metadata? ||
Question: From which firmware versions do IPC and NVR start to support Level 2 video metadata? Answer: IPC firmware version 5.1.2 and NVR firmware version 1.4.7 and later support Level 2 video metadata. Video Metadata: Video metadata refers to the ...
Titanium General || "LocalRecord Parameters: Edit the record parameters of" ||
Q: Why does the NVR repeatedly print the Settings log "LocalRecord Parameters: Edit the record parameters of" even when no manual operation is performed? A: In addition to recording user operations, the NVR also generates log entries for its own ...
Titanium General || "Max Live channel limit reached || Local Device
Q: Why does the prompt "Max Live channel limit reached" when multi-division preview is used on the auxiliary output? A: It supports a maximum of 65 channels in total across both the main output and the auxiliary output. When the main output is set to ...
Titanium General || Finding & Adding Cameras on a Switch ||
Finding & Adding Cameras on a Switch How to bring cameras that aren't plugged straight into the NVR onto your system In a nutshell Cameras plugged directly into the NVR's PoE ports add themselves. Cameras on a switch don't - you have to find them and ...
Titanium Recorder || Firmware Update for Recorders Below Version 1.2.9 ||
Firmware Update for Recorders Below Version 1.2.9 This guide will walk you through the steps to upgrade your DVR/NVR safely and effectively. Upgrading involves risks, so please follow the instructions carefully. Important Notes Ensure that the ...
Titanium General || Player Download for HDD Recovery || Web GUI
Titanium || Player Download for HDD Recovery || Web GUI When attempting to recover HDD Data after removing from a DVR or NVR you will first need an external Hard Drive Reader. Plug the HDD in and depending on your brand of recorder you will follow ...
Titanium IPC || ONVIF profile issue with Titanium Cameras with firmware version 5.1.2 and older
ONVIF profile issue with Titanium Cameras with firmware version 5.1.2 and older Cameras with firmware 5.1.2 or older have an issue with ONVIF profiles. By default the cameras will have an ONVIF profile named "admin" and will have the privileges set ...
Titanium General || Product Line Structure
Titanium General || Network Topology
Titanium Topologies
Titanium General || Titanium Browser Support
1.4.5 and above firmware supports HTML5. The autonat.com website will still use the normal plugin. You will need to port forward to use Chrome for remote viewing.
Titanium General || 5 & 8MP Support on -F -D and -B models
Model Spec added in The Resolution Part ED8004H5-B CVI:5MP(newer than FW1..3.5) ED8008H5-B ED8016H5-B ED8216H5-D ED8432H5-D ED8004H5-F CVI: 8MP/5MP(newer than FW1..3.5) ED8208H5-F ED8216H5-F
Titanium General || Cheat Sheet
Recorder Ports: HTTP port 80 Web access *Required for port forwarding. HTTPS port 443 HTTPS web access Server port 6036 server port for general comm *Required for port forwarding. POS port 9036 Port for Point-of-Sale comm RTSP 554 IP Cam Ports HTTP ...
Titanium General || Uninstall Web Plugin
Titanium Close any active browsers running the plugin. Navigate to C:\Program Files Locate WebClient_* Plugins and right click and delete. There are several plugin variants based on model and firmware version. It is safe to delete all and simple to ...
Titanium General || Illegal characters in passwords
For Security reasons you cannot use the following characters in passwords: & | ; $ You will receive an error when attempting these characters: Firmware 1.4.5 will lift this restriction.
Titanium General || Default Password
Default password for Titanium devices: 123456 Otherwise, use the self created password during activation.